Product Description 

HD3840UA is a linear, UV stabilized virgin medium density polyethylene copolymer grade (MDPE), with a narrow molecular weight distribution.

Properties:

• High stiffness
• Good impact stress
• Whiteness
• UV stabilized
• Good Stress Cracking Resistance.
• Excellent process-ability 
• Excellent internal and external surface finish

Application:

• kitchen containers
• Sceptic tanks
• Potable water tanks
• Large agricultural tanks
• Toys
• Wide variety consumer articles
• Canoes and Boats 

For technical assistance or further information on this product contact our technical team.

HI0500 is a natural high density polyethylene (HDPE) injection molding grade which combines high stiffness with good physical properties.

Application:

• Crates and Pallet
• Industrial parts 
• Thick wall parts
• Food Containers
• Engineering Parts
• Tool Boxes

Features:

• Good Impact Strength
• Good Stiffness

For technical assistance or further information on this product contact our technical team.

LFI2125A is a low density polyethylene, with a medium level of anti-block and slip agent (Erucamide). This grade offers good optical properties, low energy consumption during processing, adequate COF level and excellent draw down.

Application:

• Blown film extrusion
• Packaging film for food and goods
• General lamination film

Processing Conditions:

Extruder temperature profile: 160-180°C Frost line height: 5-7 times die diameter. Blow Up Ratio: 2-3 Recommended film thickness: 20 to 50 μm. Please note that, these processing conditions are recommended by producer only for 100% LFI2125A resin (not in the case of blending with any other compatible material), but because of the many particular factors which are outside our knowledge and control, and may affect the use of product, no warranty is given.

Health and Safety:

The resin is manufactured to the highest standards, but special requirements apply to certain applications such as food end-use contact and direct medical use. Specific information on regulatory compliance can be requested via customer. Molten polymer may be degraded if it is exposed to air during any of the processing and off-line operations. The products of degradation may have an unpleasant odor. In higher concentrations they may cause irritation of the mucus membranes. Fabrication areas should be ventilated to carry away fumes or vapors. Legislation on the control of emissions and pollution prevention should be observed. Workers should be protected from the possibility of skin or eye contact with molten polymer. The resin will burn when supplied with excess heat and oxygen. It should be handled and stored away from contact with direct flames and/or ignition sources. While burning, the resin contributes high heat and may generate a dense black smoke. Recycled resins may have previously been used as packaging for, or may have otherwise been in contact with, hazardous goods. Converters are responsible for taking all necessary precautions to ensure that recycled resins are safe for continued use. The detailed information about safety, handling, individual protection and waste disposal is provided in the relevant Safety Data Sheet. Additional specific information can be requested via customer.

Conveying:

Conveying equipment should be designed to prevent accumulation of fines and dust particles. These particles can, under certain conditions pose an explosion hazard. We recommend that the conveying system will be equipped with adequate filters and be operated and maintained in the way that ensure no leaks develop.

Storage:

Polyethylene resins should be protected from direct sunlight and/or heat during storage. The storage location should also be dry, dust free and the storage temperature should not exceed 50 °C. It is also advisable to process polyethylene resins (in pelletized or powder from) within 6 months after delivery, because excessive aging of polyethylene can lead to a deterioration in quality. Arya Sasol Polymer Company would not give any warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance.

HD-5000S is a HDPE grade specially designed for monofilament applications, which combines good processability with high tenacity. This grade has good balance of mechanical strength and high production rates. HD-5000S is also well suited for multiply applications, like ropes and stretched filaments.

Recommended barrel tempratures range is between 160 °C and 190 °C.

Application:

• Fishing net
• Rope
• Agricultural net
• Tarpaulin
• Woven sack

For technical assistance or further information on this product contact our technical team.

LDPE L2102TX00 is Low Density Poly Ethylene for Blown Film and for general purpose film without additives.used in a wide range of widths and thicknesses.

The L2102TX00 produced by the tubular reactor process.As a result the product range covers a wide variety of densities and melt flow rates.The LDPE grade slate has a widw variety of slip and anti block additives levels and includes a large numbers of grades with excellent optical properties. 

Application:

• Pouches
• Bags
• Liners 
• Lamination film

Additive: Antioxidant /Zinc Stearate

Enviroment:

The environmental aspects of any packaging material do not only imply waste issues but have to be considered in relation with the use of natural resources,the preservations of foodstuffs,etc. We considers polyethylene to be an environmentally efficient packaging material. Its low specific energy consumption and insignificant emissions to air and water designate polyethylene as the ecological alternative in comparison with the traditional packaging materials.

Recycling:

Recycling of packaging materials is supported by our manufacturers whenever ecological and social benefits are achieved and where a social infrastructure for selective collecting and sorting of packaging is fostered.Whenever ‘thermal’ recycling of packagings (i.e.incineration with energy recovery)is carried out,polyethylene –with its fairly simple molecular structure and low amount of additives-is considered to be a trouble-free fuel.

Food approvals:

The converter/food packager is responsible for compliance of the performance of the final article under foreseeable conditions of use. More specific information on the regulatory aspects of the polyethylene is available in the relevant Food Approval Declarations which can be obtained from our Sales Office.

Safety:

Under normal conditions polyethylenes do not present a toxic hazard through skin contact or inhalation.During processing contact with molten polymer and inhalation of volatilized fumes should be avoided.It is recommended to install exhaust hoods over processing machines and to keep working area well ventilated.More specific information on the safety aspects of the polyethylenes is provided in the relevant Material Safety Data Sheets,available from our Sales Office.

Storage:

As polyethylenes, like most polymers,are combustible, the usual precautions concerning ignition sources should be taken in warehouses and storage rooms.where larg quantities are kept in store,it is necessary to observe the normal rules for orderly stock control and to keep out dust and moisture.Polyethylenes should be stored in such a way as to prevent exposure to direct sunlight,as this may lead to quality deterioration.

LH0075 is a high molecular weight low density polyethylene film grade combining good flexible extrusion behavior and superior mechanical properties.

Film made from LH0075 exhibits high dart impact combined with excellent yield and tensile strength and high stiffness. It can be processed on automatic machines. It possesses good dimensional stability. LH0075 is chiefly recommended for extrusion of blown film. It is suitable for shrink film having a high resistance to hole formation and high degree of shrinkage on cooling. LH0075 contains antioxidant.

LH0075 is well suited for wide range of applications due to its unique balance of properties. The superior mechanical properties will improve the function ability of the film.

Application:

• carrier bags
• shrink film
• industrial film
• dust bin liners
• large bottles
• blow molding of small containers
• packaging of pharmaceutical products
• packaging of foodstuffs 
• bottles for storage of chemical products

Storage:

The product should be stored in dry conditions at temperature below 60 o C and protected from UV light. Improper storage can initiate degradation that causes odor generation and colour changes.

Health & Environment:

LH0075 is not classified as a dangerous product. Dust and fines from the product may give a risk for dust explosion. All equipment should be properly grounded. Inhalation of dust may irritate the respiratory system and should be avoided. During processing of the product small amounts of fumes are generated, which require proper ventilation.

Recycling:

The product is recyclable using modern methods of shredding and cleaning. It can be used for other applications only if it is approved by the relevant standard or specification. In-house production waste should be kept clean to facilitate direct recycling. Dumping and land filling is also possible in agreement with the competent authorities.

Food Content:

The composition of products complies with the EC Directive 90.128.EEC for use in food contact applications.

Packaging:

This product is packed in 25 Kg PE bags.

For technical assistance or further information on this product contact our technical team

HD5030SA is high density polyethylene copolymer containing butene-1(C4) as comonomer with medium content of slip agent additive.

HD5030SA has the following characteristics:

Good impact strength,excellent surface finish,caps with torque free property

Application:

• Caps and closures for packaging

Feature:

• Good Impact Strength
• Good Surface Finish Products

For technical assistance or further information on this product contact our technical team.

 LF0190 is a high molecular weight low density polyethylene film grade combining good flexible extrusion behavior and superior mechanical properties.

This grade offers high output and excellent drawdown

Application:

• General purpose film
• Lamination film
• Food packing films
• Cast films
• Extrusion coating

Packaging:

Supplied in pellet form and packaged in 25 Kg bags.

Food contact:

LF0190 meets the relevant requirements of plastics directive 2002/72/EC (06-08-2002) and its amendments till directive 2008/39EC relating to plastic materials and articles intended to come into contact with foodstuffs.

Pharmaceutical Application:

LF0190 meets the requirements of the European pharmacopeia version 6 section 3.1.5 for pharmaceutical application.

Conveying:

Conveying equipment should be designed prevent accumulation of fines and dust particles can, under certain conditions, pose an explosion hazard. We raccommend that the conveying system used: 1. be equipped with adegute filters 2. is operated and maintained in such a manner to ensure no leaks develop 3. that adeguate grounding exists at all times

Storage:

As ultraviolet light may cause a change in the material, all resins should be protected from direct sunlight and/or heat during storage. The storage should also be dry, dust free and the ambient temperature should not exceed 50°C. It is also excessive aging of polyethylene can lead to a deterioration in quality.

Handling:

Minimal protection to prevent possible mechanical or thermal injury to the eyes. Fabrication areas should be ventilated to carry away fumes or vapors.

Combustibility:

Polyethylene resins will burn when supplied adequate heat and oxygen. They should be handled and stored away from contact with direct flames and/or other ignition sources.

For technical assistance or further information on this product contact our technical team

LP0470 is a high molecular weight low density polyethylene film grade combining good flexible extrusion behavior and superior mechanical properties.

Application: 

• Thin film 
• Laundry packaging
• Textile packaging

Features: 

• Good Optical Properties
• Pharmaceutical Grade
• Good Stiffness
• Food Contact
• Low Blocking Tendency
• Good Drawdown Ability
• Low Friction

Processing

LP 0470 is a grade with high level of anti block and slip agent (Erucamide) the grade has an excellent draw down ability. The films produced from this grade are stiff, have excellent optical properties, low COF and no blocking.

Packaging:

Supplied in pellet form and can be packaged in 25Kg Bags, one ton semi bulk or 17 tons bulk containers.

Food packaging:

LP 0470 meets the relevant requirements of plastics directive 2002/72/EC (06-08-2002) and its amendments till directive 2008/39EC relating to plastic materials and articles intended to come into contact with foodstuffs.

Pharmaceutical Application:

LP 0470 meets the requirements of the European pharmacopeia version 6 section 3.1.5 for pharmaceutical application.

Conveying:

Conveying equipment should be designed prevents accumulation of fines and dust particles can, under certain conditions, pose an explosion hazard. We recommend that the conveying system used: 1. be equipped with adequate filters 2. is operated and maintained in such a manner to ensure no leaks develop 3. that adequate grounding exists at all times We further recommended that good housekeeping will practiced throughout the facility.

Storage:

As ultraviolet light may cause a change in the material, all resins should be protected from direct sunlight and/or heat during storage. The storage location should also be dry, dust free and the ambient temperature should not exceed 50 0C. It is also advisable to process polyethylene resins (in pelletized or powder from) within 6 months after delivery, this because also excessive aging of polyethylene can lead to a deterioration in quality.

Handling:

Minimal protection to prevent possible mechanical or thermal injury to the eyes. Fabrication areas should be ventilated to carry away fumes or vapors.

Combustibility:

Polyethylene resins will burn when supplied adequate heat and oxygen. They should be handled and stored away from contact with direct flames and/or other ignition sources .in burning; polyethylene resins contribute high heat and may generate a dense black smoke. Fires can be extinguished by conventional means with water and mist preferred. In enclosed areas, fire fighters should be provided with self contained breathing apparatus.

HF5110 is a high molecular weight, high density polyethylene, which has a broad molecular weight distribution and high melt strength. This product specially designed for producing thin films with excellent strength and rigidity.

HFI5110 is recommended for blown film extrusion. This product is suitable for manufacture of high strength grocery sacks, shopping bags and high quality thin films for uni/multi-wall packaging. Films produced with this product can be readily treated and printed to give high quality graphics.

Application:

• Film
• Light-Duty Films
• Bags and density modifies

 Features:

• Good Melt Strength
• Food Contact
• Medium Molecular Weight
• Broad Molecular Weight Distribution

 Additive:Antioxidant/Zinc Stearate 

Product properties:

Extruder temperature profile: 200-235°C Frost line height: 6-8 times die diameter. Blow Up Ratio: 3-5 Recommended film thickness: 15 to 50 μm Please note that, these processing conditions are recommended by producer only for 100% HFI5110 resin (not in the case of blending with any other compatible material), but because of the many particular factors which are outside our knowledge and control, and may affect the use of product, no warranty is given.

Food packaging:

HF 5110 meets the relevant requirements of plastics directive 2002/72/EC (06-08-2002) and its amendments till directive 2008/39EC relating to plastic materials and articles intended to come into contact with foodstuffs.

Pharmaceutical Application:

HF 5110 meets the requirements of the European pharmacopeia version 6 section 3.1.5 for pharmaceutical application.

Conveying:

Conveying equipment should be designed to prevent accumulation of fines and dust particles can, under certain conditions, pose an explosion hazard. We recommend that the conveying system used: 1. be equipped with adequate filters 2. is operated and maintained in such a manner to ensure no leaks develop 3. that adequate grounding exists at all times We further recommended that good housekeeping will practiced throughout the facility.

Storage:

As ultraviolet light may cause a change in the material, all resins should be protected from direct sunlight and/or heat during storage. The storage location should also be dry, dust free and the ambient temperature should not exceed 50. It is also advisable to process polyethylene resins (in pelletized or powder from) within 6 months after delivery, this because also excessive aging of polyethylene can lead to a deterioration in quality.

 For technical assistance or further information on this product contact our technical team.