″EP548T″ is a high melt flow rate, nucleated heterophasic copolymer with a special antistatic additivation used for thin-wall injection molding, IML and houseware applications. The product features improved balance of mechanical properties. The use of ″EPX-548T″ allows high productivity due to the easy mold filling and short cycle times. In comparison with conventional copolymers with the same MFR and the same toughness, ″EP548T″ exhibits 15% higher rigidity. ″EP548T″ is suitable for food contact.
Application:
- TWIM/IML food containers (Margarine tubs, yoghurt pots, pots for soft cheese, pudding, etc.)
- Housewares
- Caps and closures
- Flower pots and cool boxes
- Sports, leisure and toys
Features:
- High fluidity
- Easy mold filling and short cycle times
- Desirable impact/ stiffness balance
- Good dimensional stability
- Unspecified antistatic properties
- Heterophasic copolymer
# | Characteristic | Value | Unit | Test Method |
---|---|---|---|---|
1 | Physical | |||
2 | Melt Flow Rate (230 ℃, 2.16kg) | 5.0 | g/10min | ASTM D1238 |
3 | Density | 0.9 | g/cm3 | ASTM D1505 |
4 | Mechanical | |||
5 | Flexural Modulus | 1450 | Mpa | ASTM D790 |
6 | Tensile Strength at Yield | 26 | Mpa | ASTM D638 |
7 | Tensile Elongation at Yield | 5 | % | ASTM D638 |
8 | Izod Impact Strength (notched) at 23 ℃ | 65 | J/m | ASTM D256 |
9 | Izod Impact Strength (notched) at -20 ℃ | 45 | ℃ | ASTM D256 |
10 | Thermal | |||
11 | Vicat Softening Point (10N) | 155 | ℃ | ASTM D1525 |
12 | H.D.T. (0.46 MPa) | 105 | ℃ | ASTM D648 |
13 | Accelerated oven ageing in air at 150 ℃ | 360 | hours | ASTM D3012 |
For technical assistance or further information on this product contact our technical team.
Categories (Petrochemical)
Connect
Stay With Us
new on Business